- Turn the TI-85 on. If you are using the TI-CBL make sure it is
attached to the TI-85 by the linking cable and that it, too, is on.
- Press the CLEAR key and then PRGM key. You should see
the display at the right.
|
 |
- Press the menu key under the word NAMES .
You should see a display similar to
the display at the right. Your display will probably be different because you probably
have different programs in your calculator's memory.
|
 |
- Press the MORE key until the name of the program that you want to
run appears in the menu line. The screen below shows the TI-85 ready to run the
program SOUND.
|
 |
- Press the menu key under the name of the program that you want to run
and then press the ENTER key to run the program.
| |